HOME>PRODUCTS>Plain Bearings>Thrust spherical plain bearings

Thrust spherical plain bearings

The thrust spherical plain bearing has a convex spherical surface on the shaft washer and a corresponding concave spherical surface on the shell washer. They are mainly used to withstand axial loads, but they can also withstand combined (radial and axial) loads. The thrust joint bearing is separable, and the shaft and housing washer can be installed separately.

Bore Dia.-d

mm

-

mm

Inner Dia. without inner ring-Fw

mm

-

mm

Model Code
Outer Dia.-D

mm

-

mm

Outer Dia. without outer ring-Ew

mm

-

mm

Basic dimensions Tilt angle Basic load rating Mass Model
dynamic static Bearing No.
d [mm] D [mm] T [mm] α [°] C [kN] C0 [kN] [kg]
17 47 16 2.6 32.85 52.65 0.14 GX 17 F Bearing
20 55 20 5 41.85 66.15 0.25 GX 20 F Bearing
25 62 22.5 4.2 62.55 100.8 0.42 GX 25 F Bearing
30 75 26 3.7 85.5 137.7 0.61 GX 30 F Bearing
35 90 28 4.9 120.6 194.4 0.98 GX 35 F Bearing
40 105 32 5.8 155.7 247.5 1.5 GX 40 F Bearing
45 120 36.5 6.2 201.6 319.5 2.25 GX 45 F Bearing
50 130 42.5 5.3 247.5 396 3.15 GX 50 F Bearing
60 150 45 5.8 337.5 540 4.65 GX 60 F Bearing
70 160 50 3.5 427.5 675 5.4 GX 70 F Bearing
80 180 50 3.9 513 823.5 6.95 GX 80 F Bearing
100 210 59 4.6 661.5 1062 11 GX 100 F Bearing
120 230 64 3.4 792 1287 14 GX 120 F Bearing
13 piece of data

Contact us at the most favorable price

Contact us
Copyright © 2021 UKL Su ICP No. 15009032-1
< a href=" ">在线客服